ADT Kavach Coat — MS Polymer Waterproofing Coating
Seamless. UV Stable. Waterproof.
Premium single-component, solvent-free, high-build MS Polymer waterproofing coating that forms a tough seamless membrane on dry, damp or wet surfaces.
Engineered for Serious Waterproofing
Eight reasons ADT Kavach Coat is a dependable final layer for critical waterproofing applications.
Damp/Wet Surface Application
Can be applied on dry, damp or wet surfaces where conventional coatings may fail.
Seamless Waterproofing Membrane
Forms a monolithic membrane that reduces joint failure risk.
High-Build Protection
Achieve 800–1000 micron DFT in 1–2 coats for strong waterproofing coverage.
Multi-Substrate Adhesion
Bonds to concrete, metal, tiles, marble, glass with primer, APP sheet and old membranes.
No Dilution Required
Ready to use single-component system. Apply directly as supplied.
4–6 Hour Curing
Allows next coat after 4–6 hours depending on site conditions.
UV Stable
Suitable for exposed waterproofing areas without yellowing or chalking.
Solvent-Free / Eco-Friendly
Low VOC, applicator-friendly and safer for site usage.
Why ADT Kavach Coat?
Practical, technically-sound waterproofing chemistry built for real-world site conditions.
Better Than Conventional Coatings
Single-component MS Polymer system with strong bonding and seamless waterproofing performance.
Works on Damp Surfaces
Designed for practical Indian site conditions where surfaces are not always fully dry.
UV Stable Final Layer
Can be used as an exposed waterproofing protection layer in suitable applications.
Seamless High-Build Membrane
Creates a tough, continuous coating with reduced joint failure risk.
Technical Specifications
Key product data for ADT Kavach Coat MS Polymer Waterproofing Coating.
| Property | Value |
|---|---|
| Base Chemistry | MS Polymer (Modified Silicone Polymer) |
| Cure Mechanism | Atmospheric Moisture Cure |
| Components | 1K – Single Component |
| Application Temperature | 20°C to 30°C |
| Service Temperature | -5°C to +60°C |
| Colour | White |
| Surface Condition | Dry, Damp or Wet |
| Coverage | 1 kg / sqm @ 1 mm thickness |
| DFT | 800 – 1000 Microns |
| Number of Coats | 1 – 2 Coats |
| Dilution | Not required — apply as supplied |
| Shelf Life | 12 Months unopened, sealed |
| Packing | 5 Kg Bucket |
| Storage | Cool, dry place, away from direct sunlight |
Application Areas
Recommended for critical waterproofing zones across residential, commercial and industrial projects.
Water Tanks
Suitable waterproofing support for tanks per site recommendation.
Ask for Recommendation →Substrate Compatibility
Bonds to a wide range of construction substrates. Primer required for glass, glazed/vitrified surfaces and metal.
How to Apply ADT Kavach Coat
Eight simple steps across two clear phases for a professional, seamless waterproofing finish.
Surface Preparation
- 1
Clean surface
Remove dust, oil, grease and laitance.
- 2
Repair cracks
Fill cracks and joints using ADT Crack Filler or PU sealant where required.
- 3
Remove loose particles
Use wire brush, blower or suitable cleaning method.
- 4
Ensure surface is damp, not stagnant
Surface can be damp but water should not be stagnant.
Coating
- 5
Stir product thoroughly
Stir before use. Do not dilute.
- 6
Apply first coat
Use brush, roller or airless spray at recommended coverage.
- 7
Allow 4–6 hours curing
Wait for the first coat to cure before applying the next.
- 8
Apply second coat if needed
Preferably perpendicular to first coat for uniform DFT.
Precautions & Safety
Please follow these usage and storage guidelines for best results.
- Do not dilute.
- Ventilate enclosed spaces.
- Prime glazed surfaces.
- Keep away from children.
- Wash on skin/eye contact.
- Store cool, dry and sealed.
- Do not apply over stagnant water.
Coverage Calculator
Estimate product quantity and 5 Kg bucket count based on your site's area and required DFT.
Formula: 1 kg / sqm @ 1 mm thickness. Actual consumption may vary based on surface condition, porosity and wastage.
Get Your Best Price on ADT Kavach Coat
Contact our team for project pricing, bulk quotes and technical guidance.
ADT Kavach Coat 5 Kg
- 5 Kg Bucket
- MS Polymer Waterproofing Coating
- UV Stable
- Solvent-Free
- Damp Surface OK
- Coverage: 1 kg / sqm @ 1 mm thickness
Frequently Asked Questions
Everything you need to know about ADT Kavach Coat before your next project.
Send Site Requirement
Share your project details. Our waterproofing team will get back with product guidance, coverage estimate and a quotation.
Need ADT Kavach Coat for Your Site?
Share your site requirement and our team will help you with product guidance, coverage estimate and quote.